• +39 02 26826332
  • This email address is being protected from spambots. You need JavaScript enabled to view it.

Jet ejectors

Jet ejectors - product overview

Our ejectors can be utilized in numerous application fields. Each ejector is designed thereby individually for its application field and adjusted optimally to its respective utilization. For the design, construction and manufacturing we resort to our comprehensive and decades-long experiences gained in the application of ejectors in the most diverse of processes.

Choose your ejector according to the drive/motive medium or suction medium required:

Jet pump, ejector, motive media pump, injector - many names, same design and working principle

A jet pump works without a mechanical drive and therefore offers high reliability in continuous operation mode. Our jet pumps and ejectors enjoy a reputation of being particularly straightforward and robust in their functioning as well as being low in maintenance and wear. They are designed in a multitude of materials and optimised for their application purposes. The pumping effect is generated by means of a liquid or gaseous motive medium acting as energy carrier. The application field determines the shape of the flow cross-section which is designed individually dependent on the motive medium.

How does an ejector work? Animated working princlpe

Sectional model of a steam jet vacuum pump

The lower sectional model shows the internal construction of a jet pump which generates a vacuum on the suction side by means of steam as a motive medium.
Sectional model of a steam jet vacuum pump
  1. steam chest
  2. motive nozzle
  3. head
  4. inlet diffuser
  5. outlet diffuser
  1. motive flow with ptr (motive pressure)
  2. suction flow at ps (suction pressure)
  3. mixed flow at pd  (discharge pressure)
Design features and working principle of jet ejectors
The term jet ejector describes a device in which a pumping effect is achieved using a motive fluid. A jet ejector requires no mechanical drive and has no moving parts. This basic principle applies to every jet ejector in different models and ranges of application. The application determines the design of the flow section.

A steam jet ejector is illustrated below as example (steam serves as motive fluid to create vacuum). The function depends, above all, on the design of the motive nozzle (2) and of the diffuser (4 + 5). The motive fluid passes successively through these two components.

The flow section will change along this path. The pressure in the motive nozzle (2) decreases and the velocity rises. Conversely, the flow is decelerated in the diffuser (4 + 5) while its pressure increases to the discharge pressure at the outlet of the jet ejector.

The section between motive nozzle (2) and diffuser (4 + 5) has the lowest static pressure, approximately equivalent to the suction pressure ps. At this point the suction flow enters into the ejector head (3) through the suction connection B and is mixed with the motive fluid flowing with high velocity. Part of the kinetic energy is transferred to the suction flow. Motive flow and suction flow pass together - as a mixture - through the diffuser, loosing velocity and gaining pressure.

The increase from suction pressure ps to discharge pressure pd corresponds to the delivery head for the suction flow or to the pressure difference of the jet ejector. The ratio pd / ps is the compression ratio of a jet ejector.

ln a jet ejector the static pressure energy of the motive flow which cannot be directly transferred is thus converted into kinetic energy. This kinetic energy can be released to the suction flow by impulse transfer while both flows mingle. The diffuser converts the kinetic energy of the mixture consisting of motive flow and suction flow back into static pressure energy.
ln the steam jet vacuum ejector illustrated below, the critical pressure ratio is exceeded in the motive nozzle (2) (this can be recognized by the expansion of the nozzle cross-section downstream the minimum throat diameter.) The steam velocity exceeds the sonic velocity accordingly. Motive flow and suction flow are mixed at supersonic velocity and then decelerated to the sonic velocity upon reaching the diffuser throat. ln the diverging section of the diffuser, the pressure finally increases to the discharge pressure pd.
Types and designations of jet ejectors
Recommendation for sound insulation of jet ejectors

We are using cookies to give you the best experience on our site. By continuing to browse the site you are agreeing to our use of cookies.